White LED replacement in original housing
Housing alone does not prove compliance. Match the vehicle’s approved lamp specification, beam pattern and applicable standards.
Pick the change you’re considering. Understand what needs approval, what can go wrong, and what to check before paying.
Start with a category or choose a modification directly.
General reference: Motor Vehicles Act, section 52 and related rules. Lighting, mirrors, plates and horns have separate requirements. Reviewed 2026-10-02.
Housing alone does not prove compliance. Match the vehicle’s approved lamp specification, beam pattern and applicable standards.
Use approved lamps, colour, position and wiring. An aftermarket accessory is not automatically permitted.
Changing prescribed lamp colours or reducing visibility can breach lighting rules.
An unapproved conversion can create glare and fail approved beam and lamp specifications.
Keep approved size, load rating, offset and clearances; check tyre compatibility.
Changes that depart from approved specifications can breach alteration rules. There is no universal legal ±2% safe harbour.
Noise and emissions compliance plus type approval matter. There is no universal 100 dB permission for road use.
Removing emission or noise-control equipment defeats required compliance.
Ordinary private vehicles cannot use prohibited horns or reserved warning devices.
The recognised VLT thresholds are 70% front/rear and 50% sides, subject to applicable standards.
Supreme Court rulings prohibit pasted films; later standards and local rulings need careful checking. A VLT sticker alone is not permission.
Visibility restrictions and the judicial prohibition on pasted film make dark tint a high enforcement risk.
Confirm the RTO process before work and update the RC. Matching capacity alone does not complete compliance.
Unapproved changes to the original approved specification conflict with alteration requirements.
Unapproved structural alteration is prohibited. Special authorised conversions must follow their specific rules.
Must not alter approved dimensions, create dangerous projections or hide lamps or plates. Bolt-on does not mean automatically legal.
Confirm permission and RC endorsement requirements with your RTO before repainting. Form 33 is for address changes, not a general colour-change form.
Avoid protected military colour schemes and identifying markings on civilian vehicles.
Keep airbags, belts, adjustment controls and visibility unobstructed.
Fit securely without obstructing controls or visibility; never watch video while driving.
Keep it non-distracting and prevent external glare or confusion with emergency lighting.
Use a type-approved kit and authorised installer; complete inspection, RC and insurer endorsements.
Mount it securely without blocking the speedometer, steering or view. Set navigation before moving; do not handle the phone while riding.
Secure the camera and wiring; do not obstruct the road view, lamps or controls. Use it without touching it while moving.
Use fused, weather-protected wiring installed to the manufacturer’s instructions. Poor wiring can cause a fire and affect warranty claims.
Check approved mounting and payload. Do not cover the number plate, indicators or tail lamp, or create dangerous projections.
Check model approval and safe mounting; a guard must not create dangerous projections or affect structure. A motorcycle accessory is not automatically permitted on a car.
Retain required mirrors and the usable field of view. Small decorative mirrors are not a substitute for compliant equipment.
Keep the approved mudguard arrangement, reflectors, lighting and registration-plate position. Check model-specific approval before cutting parts.
Use the correct approved fitment and have the brakes checked after installation.
Do not defeat safety equipment fitted to the approved vehicle configuration.
Changes affect geometry, clearance, handling and approval. Ask the manufacturer and RTO before modifying.
Confirm approved dimensions, cable clearance and full steering movement. Extreme changes can make the vehicle unsafe.
A performance change can affect emissions, approval and warranty. Do not assume a plug-in device is road legal.
Keep the registered colour visible and do not cover glazing, lights, reflectors or plates. This is different from window tint.
Treat a dominant colour change as an RC/RTO question before fitting it. Keep the original identity markings visible.
Do not change approved seating or belt arrangements without the applicable permission and endorsement.
Avoid reserved colours, flashing patterns and glare. Obtain confirmation of applicable lighting approval before road use.
Match size, speed/load rating and construction; keep tread and pressure within safe limits.
Use the prescribed legible plate format. Never conceal or manipulate the registration mark.